✎ en:jobs:vpn_gcloud_srx [IT Notes about: Juniper, Cisco, Checkpoint, FreeBSD, Linux, Windows, VmWare, VDI, Cloud....]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=======Configuring VPN IPSEC between Juniper SRX and Google Cloud Platform (GCP) =======
 ==== Introduction. ====


**Juniper SRX**:\\
GLOBAL IP: 91.208.39.16\\
Local Network: 192.168.0.0/16\\

**GCP**:\\
GLOBAL assigned static IP:  130.211.235.196\\  
Local Network: 10.128.0.0/20\\

For this example will be used pre shared key: test \\

Google cloud platfrom are using following IKE, IPSEC policies.\\

**IKE policy:**\\
encryption: aes128\\
hash: sha1\\
Diffie-Hellman group: 2\\


**IPSEC policy:**\\
encryption: aes128\\
hash: hmac_sha1\\
Diffie-Hellman group: 2

**VPN** - tunnel mode esp
 ==== Configuring GCP. ====

1. Create Project in the chosen ZONE

For example the project with name of pr1-163914 was created in us-central1 ZONE.\\
Default local network for this ZONE - 10.128.0.0/20

2. Creating VPN router\\

For example name of router vpn-1 and assigned static GLOBAL IP. In this example - 130.211.235.196\\

  gcloud compute --project "pr1-163914" target-vpn-gateways create "vpn-1" --region "us-central1" --network "default"
  gcloud compute --project "pr1-163914" forwarding-rules create "vpn-1-rule-esp" --region "us-central1" --address "130.211.235.196" --ip-protocol "ESP" --target-vpn-gateway "vpn-1"
  gcloud compute --project "pr1-163914" forwarding-rules create "vpn-1-rule-udp500" --region "us-central1" --address "130.211.235.196" --ip-protocol "UDP" --port-range "500" --target-vpn-gateway "vpn-1"
  gcloud compute --project "pr1-163914" forwarding-rules create "vpn-1-rule-udp4500" --region "us-central1" --address "130.211.235.196" --ip-protocol "UDP" --port-range "4500" --target-vpn-gateway "vpn-1"
  gcloud compute --project "pr1-163914" vpn-tunnels create "vpn-1-tunnel-1" --region "us-central1" --peer-address "91.208.39.16" --shared-secret "text" --ike-version "2" --target-vpn-gateway "vpn-1"
  gcloud compute --project "avtest1-163914" routes create "vpn-1-tunnel-1-route-1" --network "default" --next-hop-vpn-tunnel "vpn-1-tunnel-1" next-hop-vpn-tunnel-region "us-central1" --destination-range "192.168.0.0/16"

 ==== Configuring Juniper. ====

1. Create ST interface:\\
  
  {primary:node1}[edit]
  set interfaces st0 unit 0 description GCP
  set interfaces st0 unit 0 family inet mtu 1460


2. Configuring three security zones on the Juniper:\\
  
  {primary:node1}[edit]
  set security zones security-zone ISPs interfaces reth0.0
  set security zones security-zone Internal interfaces reth1.0
  set security zones security-zone Tunnels st0.0
   
  
3. Configuring security policies (for this example I will not configure detail policy.)\\ 
  
  {primary:node1}[edit]
  set security policies default-policy permit-all


4. Configuring IKE
  
  {primary:node1}[edit]
  set security ike proposal IKE_PRO_GOOGLE authentication-method pre-shared-keys
  set security ike proposal IKE_PRO_GOOGLE dh-group group2
  set security ike proposal IKE_PRO_GOOGLE authentication-algorithm sha1
  set security ike proposal IKE_PRO_GOOGLE encryption-algorithm aes-128-cbc
  set security ike proposal IKE_PRO_GOOGLE lifetime-seconds 28800

  set security ike policy IKE_POL_GOOGLE mode main
  set security ike policy IKE_POL_GOOGLE proposals IKE_PRO_GOOGLE
  set security ike policy IKE_POL_GOOGLE pre-shared-key ascii-text
  
  set security ike gateway GOOGLE ike-policy IKE_POL_GOOGLE
  set security ike gateway GOOGLE address 130.211.235.196
  set security ike gateway GOOGLE local-identity inet 91.208.39.16
  set security ike gateway GOOGLE external-interface reth0.0
  set security ike gateway GOOGLE version v2-only

  
5. Configuring IPSEC

  {primary:node1}[edit]
  set security ipsec proposal IPSEC_PRO_GOOGLE protocol esp
  set security ipsec proposal IPSEC_PRO_GOOGLE authentication-algorithm hmac-sha1-96
  set security ipsec proposal IPSEC_PRO_GOOGLE encryption-algorithm aes-128-cbc
  set security ipsec proposal IPSEC_PRO_GOOGLE lifetime-seconds 3600

  set security ipsec policy IPSEC_POL_GOOGLE perfect-forward-secrecy keys group2
  set security ipsec policy IPSEC_POL_GOOGLE proposals IPSEC_PRO_GOOGLE

  set security ipsec vpn VPN_GOOGLE bind-interface st0.0
  set security ipsec vpn VPN_GOOGLE ike gateway GOOGLE
  set security ipsec vpn VPN_GOOGLE ike ipsec-policy IPSEC_POL_GOOGLE

6. Configuring routing

  {primary:node1}[edit]
  set routing-options static route 10.128.0.0/20 next-hop st0.0



7. Commit

  {primary:node1}[edit]
  commit
  


 ==== About author  ====
[[https://www.linkedin.com/pub/alexey-vyrodov/59/976/16b|Profile]] of the author