--- en:jobs:xenserverdundeebetaceph [2015/11/23 17:00]
admin [1. Nodes configuration]
+++ en:jobs:xenserverdundeebetaceph [2015/11/23 18:32]
admin [1. Installing XenServer and XenCenter]
@@ Line 22: / Line 22: @@
 Doesn't metter. Only one ethernet port were used.\\
-I am using 192.168.5.119/23 for node and 192.168.4.197 for XenServer\\
+I am using 192.168.5.119/23 for node and 192.168.4.197 for %%XenServer%%\\
-**Instalating XenCenter and Xenserver**
+**Instalating %%XenCenter%% and %%Xenserver%%**
-Simply install Windows 2012 R2 OS to XenCenter server. Configure Network with IP address and than install [[http://downloadns.citrix.com.edgesuite.net/10760/XenServer-6.6.90-XenCenterSetup.exe|XenCenter]]
+Simply install Windows 2012 R2 OS to manager %%XenCenter%% server. Configure Network with IP address and than install [[http://downloadns.citrix.com.edgesuite.net/10760/XenServer-6.6.90-XenCenterSetup.exe|XenCenter]]
-Also install XenServer to first hdd with using follow [[http://downloadns.citrix.com.edgesuite.net/10759/XenServer-6.6.90-install-cd.iso|ISO]]
+Also install %%XenServer%% to first hdd with using follow [[http://downloadns.citrix.com.edgesuite.net/10759/XenServer-6.6.90-install-cd.iso|ISO]] and configure Network with IP address. Hosname is xenserver-test.
-Example for IMM10:\\
+ ==== 2. Installing ceph rbd on XenServer node ====
-  cat /etc/sysconfig/network-scripts/ifcfg-eth0
+==2.1. Setup Centos repo.==
-  DEVICE=eth0
+Set up repository Centos-Base, Centos-Updates and Centos-Extras by using real base links.
-  HWADDR=00:1e:67:0c:41:f8
-  MASTER=bond0
-  SLAVE=yes
-  ONBOOT=yes
-  BOOTPROTO=none
-  MTU=1500
-  NM_CONTROLLED=no
-  IPV6INIT=no
-  cat /etc/sysconfig/network-scripts/ifcfg-eth1
+==2.2. Setup ceph repo.==
-  DEVICE=eth1
+Set up repository:
-  HWADDR=00:1e:67:0c:41:f9
-  MASTER=bond0
-  SLAVE=yes
-  ONBOOT=yes
-  BOOTPROTO=none
-  MTU=1500
-  DEFROUTE=yes
-  NM_CONTROLLED=no
-  IPV6INIT=no
-  cat /etc/sysconfig/network-scripts/ifcfg-bond0
-  DEVICE=bond0
-  BONDING_OPTS='mode=0 miimon=100'
-  ONBOOT=yes
-  BOOTPROTO=none
-  MTU=1500
-  NM_CONTROLLED=no
-  IPV6INIT=no
-  HOTPLUG=no
-  cat /etc/sysconfig/network-scripts/ifcfg-bond0.12
-  DEVICE=bond0.12
-  VLAN=yes
-  BRIDGE=virtlocal
-  ONBOOT=yes
-  MTU=1500
-  NM_CONTROLLED=no
-  IPV6INIT=no
-  HOTPLUG=no
-  cat /etc/sysconfig/network-scripts/ifcfg-virtlocal
-  DEVICE=virtlocal
-  NM_CONTROLLED=no
-  ONBOOT=yes
-  TYPE=bridge
-  BOOTPROTO=none
-  IPADDR=172.25.0.210
-  PREFIX=16
-  MTU=1500
-  cat /etc/sysconfig/network-scripts/ifcfg-bond0.13
-  DEVICE=bond0.13
-  VLAN=yes
-  BRIDGE=ovirtmgmt
-  ONBOOT=yes
-  MTU=1500
-  NM_CONTROLLED=no
-  IPV6INIT=no
-  HOTPLUG=no
-  cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
-  DEVICE=ovirtmgmt
-  NM_CONTROLLED=no
-  ONBOOT=yes
-  TYPE=bridge
-  BOOTPROTO=none
-  IPADDR=172.26.2.210
-  PREFIX=24
-  IPV4_FAILURE_FATAL=no
-  MTU=1500
-  GATEWAY=172.26.2.205 # GATEWAY MUST BE CONFIGURED ON ovirtmgmt interface to install Hosted  Engine correctly .
-  cat /etc/sysconfig/network-scripts/ifcfg-bond0.14
-  DEVICE=bond0.14
-  TYPE=Ethernet
-  ONBOOT=yes
-  BOOTPROTO=none
-  VLAN=yes
-  NETWORK=172.26.1.0
-  NETMASK=255.255.255.0
-  IPADDR=172.26.1.210
-**Software configuration.**\\
-OS Centos 7.1. Selinux and firewall were disabled.\\
-Ssh passwordless access was configured on all nodes.\\
-  ssh-keygen -t dsa (creation of passwordless key)
-  cd /root/.ssh
-  cat id_dsa.pub >> authorized_keys
-  chown root.root authorized_keys
-  chmod 600 authorized_keys
-  echo "StrictHostKeyChecking no" > config
-Data disks ware assembled with (RAIDz) base on zvol [[http://zfsonlinux.org/|zfs on linux]]. Compression switch on. Vdev /dev/zvol/rzfs/cvol was created on each node.\\
-For every of nodes install zfs on linux:\\
-  yum localinstall --nogpgcheck https://download.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm
-  yum localinstall --nogpgcheck http://archive.zfsonlinux.org/epel/zfs-release.el7.noarch.rpm
-  yum install kernel-devel
-  yum install zfs
-Checking for zfs.ko kernel module:\\
-  ls /usr/lib/modules/`uname -r`/extra/
-For every of nodes create zpool rzfs:\\
-  zpool create rzfs raidz /dev/sdb /dev/sdc /dev/sdd
-Create zvol with cvol name:\\
-  zfs create -V 1700G rzfs/cvol
-Switch on compression:\\
-  zfs set compression=lz4 rzfs
-All nodes should have the same /etc/hosts file:\\
-.26.1.210 imm10
-.26.1.211 imm11
-.26.1.212 imm12
-.26.1.213 imm13
-.26.2.210 imm10.virt
-.26.2.211 imm11.virt
-.26.2.212 imm12.virt
-.26.2.213 imm13.virt
-.26.2.250 manager #HOSTED_ENGINE VM
-.26.2.250 manager.virt #HOSTED_ENGINE VM
-.26.2.254 controller #ShareIP for Openstack
- ==== 2. Installing ceph rbd on all nodes ====
-==2.1. Setup repo on all nodes.==
-Set up repository: (on all nodes)
    cat << EOT > /etc/yum.repos.d/ceph.repo
   [ceph]
-  name=Ceph packages for \$basearch
+  name=Ceph packages for Citrix
-  baseurl=http://ceph.com/rpm-hammer/el7/\$basearch
+  baseurl=http://download.ceph.com/rpm/el7/x86_64/
   enabled=1
   gpgcheck=1
   type=rpm-md
   gpgkey=https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc
   [ceph-noarch]
   name=Ceph noarch packages
-  baseurl=http://ceph.com/rpm-hammer/el7/noarch
+  baseurl=http://download.ceph.com/rpm/el7/noarch/
   enabled=1
   gpgcheck=1
@@ Line 191: / Line 57: @@
   EOT
-Import gpgkey: (on all nodes)
-   rpm --import 'https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc'
+Import gpgkey:
-==2.2. Installing ceph.==
+   rpm --import 'https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc'
-**Don't forget to configure ntp server on all nodes.**
+==2.3. Installing ceph.==
-For all nodes:
+  yum install ceph-common ceph ceph-deploy ntp -y
-  yum install ceph-common ceph ceph-fuse ceph-deploy ntp -y
-  systemctl enable ntpd
-  systemctl start ntpd
 ==2.3. Deploying monitors.==

en/jobs/xenserverdundeebetaceph.txt · Last modified: 2015/11/23 19:01 by admin

Show page